Skip to main content
BuyerBuy & source

Buying a Used Service Rig: Inspection and Paperwork Checklist

Inspection and paperwork checklist for buying a used service or workover rig in Western Canada, including mast, pressure control and carrier records.

By Redeploy HQ5 minute read · 6 topicsUpdated Nov 15, 2026
In this guide

Buyer checklist

  1. 01

    Overview

    A used service rig or workover rig is a spread, not a single machine. The mast, carrier, drawworks, pumps, tanks, well-control equipment and trucks may be sold together or in parts, and the records that matter are different for each. This checklist is for a Western Canadian buyer who is comparing listings and planning an inspection. It is a practical buying list, not a well-control or occupancy standard, and it does not replace a qualified rig inspection.

    Browse used service and workover rigs, including service rigs in Alberta. If you are comparing a larger drilling spread, see used drilling rigs. Related pressure-control and well-intervention equipment is also listed under wireline and slickline.

  2. 02

    Start with the spread, not the photo

    Before you travel to a yard, get a written list of what is included in the sale. Typical components, when they are part of the package, include:

    Listings may describe a single, double or slant (or similar) mast, a flush-by unit, or a workover rig. Those words describe the configuration, not the condition. Ask for the manufacturer, model, year, mast rating, last well or last in-service date, and the hours or service history the seller has. Confirm whether the sale is the complete spread you think it is, or the carrier and mast only.

    A photograph of a rig standing on a lease can include rented BOPs, a customer’s tanks, or trucks that are not in the sale. Get the scope in writing. Documents for buying used oilfield equipment is a useful companion for identifiers and records.

    • Carrier or trailer and the mast, including crown, racking and raising system
    • Drawworks, blocks, line and sand line, if equipped
    • Power package: engines, transmissions, hydraulics and electrical
    • Pumps, tanks, piping and the circulating or fluid system
    • Well-control equipment: BOP stack, accumulator, choke manifold and related lines, if included
    • Doghouse, doghouse truck, workover pump truck, or other support units, if included
    • Tools, slips, elevators, handling equipment and spares
  3. 03

    Inspection checklist

    Use this list on site or as the agenda for a third-party inspection. Record what you saw, what you could not see, and what the seller stated.

    Carrier and road gear. Frame, suspension, axles, fifth wheel or pintle, brakes, lights, steering, tires or tracks, and the condition of the cab. For a truck-mounted or trailer-mounted rig that will travel on public roads, the carrier is a commercial vehicle as well as a piece of oilfield equipment.

    Mast and raising system. Visible structure, pins, raising rams or lines, locks, crown, sheaves, and any known history of damage, repair or mast inspection. Ask for the mast rating and any inspection or recertification records the seller has. Do not treat a fresh coat of paint as a structural inspection.

    Drawworks, line and hoisting equipment. Drawworks function, brakes, clutches, guards, lubrication, drum condition, and the sand line if it is included. Ask about the drilling or sand line: size, age or ton-mile history if it is available, and whether it stays with the rig.

    Power and hydraulics. Engines, transmissions, pumps, leaks, warning lights, and maintenance records. Ask for hour-meter readings and whether the meters are known to be accurate. Start the package if you can do so safely, or agree on a supervised function test.

    Fluid system. Pumps, tanks, piping, valves and any mixing or filtration equipment included in the sale. Check for corrosion, leaks and missing components. Confirm tank capacity and whether the tanks are part of the price.

    Well-control equipment. If BOPs, the accumulator, or a choke manifold are included, ask for the working-pressure rating, bore, connection types, sour-service rating if claimed, and the latest pressure-test or inspection records. Equipment that cannot be documented should be treated as unverified, not as certified. If well-control equipment is not part of the sale, note that clearly in your comparison; replacing it is a separate purchase.

    Doghouse, tools and loose equipment. Walk the inventory against the written list. Loose tools go missing between the photo date and the pickup date if they are not listed.

    Function and safety systems. Emergency shutdowns, fire suppression if fitted, lighting, guarding, and any known deficiencies. Ask the seller to disclose outstanding repairs.

    If you cannot inspect a component (line inside a drum, mast internals, underside of a carrier), write that down rather than assuming it is acceptable.

  4. 04

    Paperwork to request

    Ask for copies, or for a list of what exists and can be shown on site:

    Provincial commercial vehicle inspection rules differ. Confirm the current requirements for the province where the carrier is registered and where you will operate it. Do not assume a unit that has been sitting in a yard is still in inspection.

    • Manufacturer, model and serial numbers for the carrier, mast, drawworks, engines and major pumps
    • Mast inspection or recertification records, if any, with dates
    • Maintenance logs, engine hours, and major repair or rebuild records
    • Pressure-test and inspection records for BOPs and other pressure-control equipment included in the sale
    • For carriers and trucks that will travel on public roads: registration status and the commercial vehicle inspection documents required in the province of registration and of use
    • A written list of included vehicles, tools and components, and of known defects or missing parts
  5. 05

    Transport and site handover

    Moving a service rig is a planned rig move, not a single trucking quote. Confirm who is responsible for lowering the mast if it is standing, preparing the carrier, loading support equipment, and permits for overweight or oversize loads. See Planning pickup of used oilfield equipment in Alberta and Alberta’s oversize and overweight permit rules. Other provinces have their own permit rules.

    Agree where the inspection ends and the handover starts: what will be running, what will be drained or cleaned, and what happens if a defect is found after a deposit but before pickup. Get that in writing.

  6. 06

    Buying on Redeploy HQ

    Redeploy HQ lists used and surplus service and workover rigs from Western Canadian sellers. Compare the configuration, the included equipment, the location and the records the seller can provide on the service and workover rigs page, or narrow to Alberta when that is the market you are buying in. Use the same checklist on every candidate so a complete but older spread can be compared fairly with a tighter, better-documented one.

Common questions

What is the difference between a service rig, a workover rig and a flush-by?

All three are used for well servicing, but the configuration and duty differ. A listing title is not a specification. Ask the seller for the mast type, the work the rig last did, and the equipment included in the sale, and compare those facts rather than the name alone.

Does a used service rig usually include the BOP stack?

Sometimes. Many sales are the carrier and mast with some support equipment; well-control equipment may be rented, owned separately, or included. Require a written list, and ask for test records if BOPs are part of the price.

Should I have a third-party inspection?

If you are not in a position to inspect a mast, drawworks, carrier and well-control package yourself, yes. A qualified inspector and a written report are often cheaper than discovering a structural or well-control problem after you have bought the rig.

What road documents does the carrier need?

A truck-mounted or trailer-mounted rig that will travel on public roads needs the registration and commercial vehicle inspection documents required by the relevant province. Ask for the current status before you plan a move, and confirm what will still be valid on the handover date.

Can I compare a used service rig with a used drilling rig?

Only at a high level. A drilling rig is a different spread, with a different mast, circulating system and typically a different crew and transport plan. If your work is drilling rather than well servicing, start with used drilling rigs.

Sources and further reading

Check the current guidance for the equipment, location and work involved.