Sweet vs Sour Service: What It Means When Buying Used Oilfield Equipment
What sweet and sour service mean on used tanks, separators, vessels and compressor packages, and which records to request before you buy.
In this guide
Buyer checklist
- 01
Overview
“Sweet” and “sour” on a used-equipment listing describe the service the equipment was built or used for, not a cosmetic grade. Sour service involves hydrogen sulphide (H2S). That matters for materials, previous corrosion, cleaning, and whether the item is suitable for the well or facility you have in mind. This guide explains the terms as they are used in Western Canada, what to ask a seller, and how to treat a “sour” claim on a used separator, tank, vessel or compressor package. It is not a materials-selection or facility-design review.
Compare current listings for separators, tanks, pressure vessels and compressor packages.
- 02
What “sour” means in this context
The Alberta Energy Regulator describes sour gas as natural gas that contains measurable amounts of hydrogen sulphide (H2S). H2S is toxic and flammable. The AER notes that it can be recognized by a rotten-egg smell at low concentrations and that, because it is heavier than air, it can accumulate in low-lying areas.
On used equipment, buyers and sellers use two related but different ideas:
Do not treat a listing that says “sour” as proof of either idea. Ask whether the word refers to previous service, to a materials specification, or to both, and get the supporting records.
Facility classification, emergency planning and setback rules for sour wells and sour facilities are separate from a used-equipment purchase. Those duties sit with the operator and the applicable regulator (in Alberta, documents such as Directive 056 and Directive 071). Buying a used sour-service vessel does not satisfy them.
- Previous service. The product the equipment actually handled: sweet gas or oil, sour gas or oil, produced water, condensate, or chemicals. A separator that ran in sour service may have been exposed to H2S even if someone later cleaned it.
- Design or materials rating. Whether the equipment was specified for H2S-containing service. The usual materials standard cited for oil and gas production in H2S-containing environments is ISO 15156, also published as NACE MR0175 / ISO 15156. That standard covers the selection and qualification of cracking-resistant materials. A nameplate, data sheet or specification that cites ISO 15156 or NACE MR0175 is a design claim. It is not a statement about the equipment’s current condition.
- 03
Why previous service matters on used equipment
H2S and sour fluids can promote cracking and corrosion in susceptible materials, and they can leave iron sulphide deposits. Iron sulphide can be pyrophoric when it dries and is exposed to air, and it can hide the true condition of a steel surface. Produced water, chlorides and carbon dioxide, which often accompany sour production, also affect corrosion and the condition of coatings and elastomers.
That is why a used tank, separator or piping spool with sour history should be treated as a cleaning, inspection and materials question, not only as a cosmetic one:
A sweet-service vessel is not automatically the cheaper or safer buy. It may still be corroded from produced water or carbon dioxide, and it may be the wrong materials choice if you intend to put it into sour service. Changing service from sweet to sour, or the reverse, is a design and regulatory question for a qualified reviewer. It is not something to decide from a listing title.
- Ask for the last product, a fluid analysis if one exists, and the cleaning history
- Ask for ultrasonic thickness readings and any inspection for cracking or pitting, not only a photograph of the paint
- Ask what happened to internals: trays, plates, baffles, weirs, mist extractors, and elastomer seals or gaskets
- Treat undocumented weld repairs, replacement spools and “it was flushed” statements as incomplete until they are supported
- 04
What to request on separators, tanks, vessels and compressor packages
Separators and other pressure vessels. Ask for the nameplate, CRN, manufacturer’s data report, design pressure and temperature, previous service, and any ISO 15156 or NACE MR0175 statement in the original specification. Confirm trim, internals and relief devices. If you will move the vessel to another province, registration and used-vessel acceptance still apply; see Moving a used pressure vessel between provinces.
Tanks. Ask for previous product, cleaning history, internal coating condition, UT readings on the floor and lower shell, and any inspection reports. Sour, produced-water or chemical service can all leave a tank unfit for the next product until it is cleaned and inspected. Capacity and dimensions are covered in 400 bbl tank dimensions and buying checks.
Compressor packages. Ask whether the package was built or used for sweet or sour gas, and confirm that claim against the data sheet, cylinder or frame materials, cooler, piping, valves, and the pressure vessels on the skid. A “sour package” should mean a documented specification, not only the last field the unit sat in. Hours, overhaul history and the condition of the cooler and scrubbers still matter; service type does not replace a mechanical inspection. See also How to compare used oilfield compressor packages.
In every case, keep the seller’s statements attributed. A verbal “it was sour trim” is weaker than a data sheet. A data sheet is weaker than a data sheet plus recent inspection. Documents for buying used oilfield equipment describes how to keep identifiers and records together.
- 05
Cleaning, handling and transport
Used sour-service equipment may still contain residual fluids or deposits. Cleaning and inerting should be done by people who are set up for that work, with the hazards of H2S and of iron sulphide in mind. Do not open, grind or weld on equipment of unknown sour history as a casual yard task.
Tell the carrier about previous contents and the cleaning status. Transport rules for residual dangerous goods, when they apply, are the carrier’s and the consignor’s to observe; see Transport Canada’s dangerous-goods classification guidance if residual product may still be present. Confirm that the item is actually empty and safe to load before it is lifted.
- 06
Buying on Redeploy HQ
Redeploy HQ listings for separators, tanks, pressure vessels and compressor packages should be read for both the design data and the previous service. Compare those fields, the seller’s location and the records on offer, and ask the follow-up questions above before you treat a “sweet” or “sour” label as decisive. Start from the separators, tanks, pressure vessels and compressor packages category pages.
Common questions
What is the difference between sour gas and sour-service equipment?
Sour gas is natural gas that contains measurable H2S, as the AER describes it. Sour-service equipment is equipment specified or used for that kind of duty. A used vessel can have a sour-service materials specification, a sour operating history, both, or neither. Ask which one the seller means.
Is a NACE or ISO 15156 stamp enough to put a used vessel into sour service?
No. ISO 15156 / NACE MR0175 addresses materials selection and qualification for H2S-containing production environments. It does not prove that this used item is still fit for service, or that your facility and procedures are acceptable to the regulator. You still need condition, cleaning, and a review against your intended service.
Can I convert a sweet-service separator to sour service?
Only after a qualified review of the design, materials, condition, and the requirements that apply at the installation. Do not assume a change of service is a paperwork exercise.
Why does cleaning history matter so much after sour service?
Residual fluids and iron sulphide deposits can be hazardous to handle and can hide corrosion. A cleaning record, together with inspection and thickness readings, is how you learn what you are actually buying.
Do tanks follow the same sweet and sour questions as pressure vessels?
The materials standard and CRN path are not the same as for pressure vessels, but previous product, cleaning, coating condition and inspection still matter. Ask the same service-history questions, then follow the tank inspection points in the tanks guide.
Continue your equipment search
Sources and further reading
Check the current guidance for the equipment, location and work involved.